Scanning From the Operator Panel - WSD Scan
If the printer is connected to a computer via network using WSD (Web Services on Devices), you can use the WSD
Scan function to send scanned images to a computer.
The following procedure uses Windows 7 as an example.
NOTE:
•
To use WSD Scan, you need to setup connection using WSD.
•
WSD is supported only on Windows Vista
Printer Setup for WSD Scan
Setup the printer and computer for connection using WSD.
• Checking the Printer Setting
To use the WSD Scan function, WSD Scan needs to be set to Enable. For details,
• Setting Up the Computer
NOTE:
•
For Windows 8, the computer automatically connects the printer using WSD. There is no need to install the printer manually.
For Windows 7:
1
Click Start
→
Computer
2
Right-click the icon for the printer, and then click Install.
The printer is connected using WSD.
For Windows Vista:
1
Click Start
→
Network.
2
Right-click the icon for the printer, and then click Install.
3
Click Continue.
The printer is connected using WSD.
218
Scanning
®
, Windows 7, and Windows 8.
→
Network.
"Protocols" on page
305.