Network Connection Setup; Network Printer Setup On A Local Network - Fuji Xerox DocuPrint CM405 df User Manual

Windows 8, Windows 8 64-bit Edition, or Windows Server 2012
1
On the Windows desktop, right-click the bottom left corner of the screen, and then click Control Panel
Hardware and Sound (Hardware for Windows Server 2012)
2
Click Add a printer.
3
Select your printer.
4
Click Have Disk to display the Install From Disk dialog box.
5
Click Browse, and then select the extracted setup information (.inf) file in
Specification (XPS) Print Driver" on page
6
Click Open.
7
Click OK.
8
Select your printer name and click Next.
9
To change the printer name, enter the printer name in the Printer name box, and then click Next.
Installation starts.
10
If you do not share your printer, select Do not share this printer.
If you share your printer, select Share this printer so that others on your network can find and use it.
11
Click Next.
12
To use this printer as the default printer, select the Set as the default printer check box.
13
As the driver installation is completed, click Print a test page to print a test page.
14
Click Finish.

Network Connection Setup

NOTE:
• To use this printer in a Linux environment, you need to install a Linux driver. For more information on how to install and use
these, see also "Installing Print Driver on Computers Running Linux (CUPS)" on page

Network Printer Setup on a Local Network

• For installing PCL 6 and Fax Driver
1
On the top screen of Easy Install Navi, click Installing Driver and Software.
2
Click Print/Fax Driver.
3
Select Standard or Custom setup.
4
Follow the on-screen instructions to install the print driver.
• For Installing PS Driver
For information on how to install the PS driver, refer to the PostScript User Guide.
→ Devices and Printers.
102.
Printer Connection and Software Installation
"For Installing XML Paper
123.
→
105