Junk Fax Filter; Secure Receive; Forward Settings - Fuji Xerox DocuPrint CM405 df User Manual

Fuji xerox docuprint cm405 df user guide
Hide thumbs Also See for DocuPrint CM405 df:
Table of Contents

Advertisement

Auto Answer Setup
Purpose:
To configure settings for automatic fax reception.
Values:
Auto Answer Fax
Auto Answer TEL/FAX
Auto Answer Ans/FAX

Junk Fax Filter

Purpose:
To reject unwanted faxes by accepting faxes only from the fax numbers registered in the Fax Address Book.
Values:
*
Off
On

Secure Receive

NOTE:
Secure Receive feature is available only when Panel Lock Set is set to Enable.
Purpose:
To specify whether to require a passcode to receive faxes, and to set or change the passcode.
Values:
Secure Receive Set
Change Passcode
*1 This item is available only when Secure Receive Set is set to Enable.

Forward Settings

NOTE:
The Print and E-mail feature is available only when E-mail information and Forwarding E-mail Address are registered.
For information on E-mail, see
CentreWare Internet Services.
The Forward to Server and Print and Forward to Server feature are available only when information about
shared folders and servers are registered in Forward to Server Settings. For details about shared folders on servers, see
"Using a Scanner on the Network" on page
CentreWare Internet Services.
310
Using the Operator Panel Menus and Keypad
*
0
0-255
*
6
0-255
*
21
0-255
Does not reject faxes sent from unwanted numbers.
Rejects faxes sent from unwanted numbers.
*
Disable
Enable
*1
0000–9999
"E-Mail Settings" on page 248
224. For details about Forward to Server Settings, see the Help on the
Sets the interval at which the printer goes into the fax receive
mode after receiving an incoming call. The value is set in
increments of 1 second.
Sets the interval at which the printer goes into the fax receive
mode after the external telephone receives an incoming call.
The value is set in increments of 1 second.
Sets the interval at which the printer goes into the fax receive
mode after the external answering machine receives an
incoming call. The value is set in increments of 1 second.
Does not require a passcode to receive faxes.
Requires a passcode to receive faxes.
Sets or changes the passcode required to receive faxes.
and information on Forwarding E-mail Address, see the Help on

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents