Setting Sounds
This section includes:
• "Speaker Volume" on page 282
• "Ringer Volume" on page 282
Speaker Volume
1
Press the
(System) button.
2
Select the Tools tab, and then select Admin Settings.
3
Select Fax Settings.
4
Select Fax Line Settings.
5
Select Line Monitor.
6
Select the desired volume, and then select OK.
7
Reboot the printer by turning the power switch off and then on.
Ringer Volume
1
Press the
(System) button.
2
Select the Tools tab, and then select Admin Settings.
3
Select Fax Settings.
4
Select Incoming Defaults.
5
Select Ring Tone Volume.
6
Select the desired volume, and then select OK.
7
Reboot the printer by turning the power switch off and then on.
282
Faxing