Select Line Type - Fuji Xerox DocuPrint CM405 df User Manual

Option
Prefix Dial Number
Fax Cover Page
Send Header
ECM
Modem Speed
Display Manual Fax Recipients
Fax Reports
• Prefix Dial
NOTE:
• Prefix Dial supports only the environment where you send a fax to the external line number. To use Prefix Dial, you must do
the following from the operator panel.
1
Press the (System) button.
2
Select the Tools tab, and then select Admin Settings.
3
Select Fax Settings.
4
Select Fax Line Settings.
5

Select Line Type.

6
Select PBX.
7
Access the Fax Settings menu by following steps from
8
Select Transmission Defaults.
9
Select Prefix Dial.
10
Select On, and then select OK.
11
Enter an up-to-five-digit prefix number from 0
12
Reboot the printer by turning the power switch off and then on.
286
Faxing
Description
You can set a prefix dial number of up to five digits. This number dials before
any auto dial number is started. It is useful for accessing the Private
Automatic Branch Exchange (PBX).
You can set whether to attach a cover page to faxes when sending faxes.
Prints the sender's information on the header of faxes.
Select Off to turn this feature off.
Select On to turn this feature on.
Note that if United States is selected for the setting of Region, this option
does not appear on the menu. The setting is fixed to On and cannot be
changed.
For information on the region setting, see
From the Operator Panel" on page
You can set whether to enable or disable the ECM (Error Correction Mode).
You can set the modem speed.
To set whether to display the fax number of the recipient when manually
sending a fax.
Fax Activity You can set whether to automatically print a fax activity report after every 50
incoming and outgoing fax communications.
Fax Transmit You can set whether to print a transmission result after a fax transmission.
Fax Broadcast You can set whether to print a transmission result after a fax broadcast to
multiple locations.
Fax Protocol You can set whether to print the protocol monitor report after a fax
transmission to monitor fax protocol problems.
1 to 3.
9, *, and #, and then select OK.
–
"Specifying the Fax Initial Settings
260.