Sending A Fax; Loading An Original Document - Fuji Xerox DocuPrint CM405 df User Manual

Sending a Fax

You can fax data from your printer.
This section includes:
• "Loading an Original Document" on page 263
• "Adjusting the Document Resolution" on page 265
• "Adjusting the Document Contrast" on page 265
• "Inserting a Pause" on page 265
• "Sending a Fax From Memory" on page 266
• "Sending a Fax Manually" on page 267
• "Confirming Transmissions" on page 267
• "Automatic Redialing" on page 267

Loading an Original Document

You can use the DADF or the document glass to load an original document for faxing.
To Fax a Document Using the DADF
Using the duplex automatic document feeder (DADF), you can load up to 50 sheets of 75 gsm (20 lb) paper at a
time.
NOTE:
• To get the best scan quality, especially for gray scale images, use the document glass instead of the DADF.
• You cannot load the following documents in the DADF. Be sure to place them on the document glass.
Curled originals
Lightweight originals
Cut and paste originals
1
Place the document(s) face up on the DADF with the top edge of the documents in first. Then adjust the
document guides to the correct document size.
2
Adjust the document resolution.
See also:
• "Adjusting the Document Resolution" on page 265
Pre-punched paper
Folded, creased or torn originals
Carbon paper
263
Faxing