Scanning Using The Wia Driver - Fuji Xerox DocuPrint CM405 df User Manual

Scanning Using the WIA Driver

Your printer also supports the Windows Image Acquisition (WIA) driver for scanning images. WIA is one of the
standard components provided by Windows XP and later operating systems and works with digital cameras and
scanners. Unlike the TWAIN driver, the WIA driver allows you to scan an image and easily manipulate those images
without using additional software.
NOTE:
• Ensure that the printer is connected to the computer via the USB cable or to a network.
• The Windows Image Acquisition (WIA) driver is supported only on Windows.
To Scan an Image From the Drawing Software
1
Load the document(s) face up with top edge in first into the DADF.
OR
Place a single document face down on the document glass, and close the document cover.
See also:
• "Making Copies From the DADF" on page 201
• "Making Copies From the Document Glass" on page 199
2
Start the drawing software, such as Paint for Windows.
NOTE:
• When you use Windows Vista, use Windows Photo Gallery instead of Paint.
• When using applications that utilize WIA 2.0, such as Windows Fax and Scan on Windows Vista, Windows 7 and
Windows 8, the Feeder (Scan both sides) option can be selected for duplex (two-sided) scanning.
3
Click Paint button
Windows Server 2003, Windows Server 2008 and Windows Vista).
The Scan using FX DP CM405 df (WIA - USB) window appears.
NOTE:
• The illustration may vary for different operating systems.
→ From scanner or camera (Click File → From Scanner or Camera for Windows XP,
221
Scanning