8.3
Replacing the processor heat sink
Field Replaceable Units (FRU)
Average task duration: 15 minutes
8.3.1
Required tools
Preliminary and concluding steps: tool-less
●
Removing and installing the processor heat sink:
●
– Phillips PH2 / (+) No. 2 screw driver
8.3.2
Preliminary steps
Before replacing the processor heat sink, perform the following steps:
"Disabling SVOM boot watchdog functionality" on page 65
Ê
"Shutting down the server node" on page 45
Ê
"Removing the server node from the server enclosure" on page 46
Ê
8.3.3
Removing the processor heat sink
Ê Remove the processor heat sink as described in section
processor heat sinks" on page
8.3.4
Installing the processor heat sink
There are two different types of heat sinks.
CX250 S2
188.
Upgrade and Maintenance Manual
Processors
"Removing
207