Software Configuration - Fujitsu PRIMERGY CX250 S2 Upgrade And Maintenance Manual

Ê If applicable, reconnect all external cables.
"Switching on the server node" on page 64
Ê
"Enabling boot watchdog functionality" on page 74
Ê
9.2.3.6

Software configuration

The UFM delivery set includes the "Recovery Tool CD" to setup the ESXi
configuration. Proceed as follows:
Ê Switch on the server.
Ê Right after switching on the server, insert the "Recovery Tool CD" into the
DVD drive and close the drive tray.
Ê The server should now boot from the "Recovery Tool CD".
Ê Follow the on-screen instructions.
CX250 S2
Upgrade and Maintenance Manual
System board and components
223