Fujitsu PRIMERGY CX250 S2 Upgrade And Maintenance Manual page 237

Figure 140: Closing socket release lever 1
Ê Close the socket release lever marked Open 1st (1) and latch it under the
load plate retention tab (2).
Ê If applicable, install the second processor accordingly.
Applying thermal paste
Ê If you are reusing the CPU heat sink of the defective system board module,
apply thermal paste as described in
Installing CPU heat sinks
Ê Install the CPU heat sinks on the new system board module as described in
"Installing the processor heat sink" on page
CX250 S2
Upgrade and Maintenance Manual
System board and components
"Applying thermal paste" on page
207.
199.
237