Fujitsu PRIMERGY CX250 S2 Upgrade And Maintenance Manual page 70

Basic software procedures
Figure 22: Flash Update screen
– Press the Enter key to reboot the system.
– Remove the server node from the server enclosure as described in section
"Removing the server node from the server enclosure" on page
– Disable BIOS recovery mode using the onboard jumpers:
I
For detailed information on jumper settings, refer to section
connectors" on page
– Install the server node in the server enclosure
the server enclosure" on page
70
257.
63.
Upgrade and Maintenance Manual
"Installing the server node in
46.
"Onboard
CX250 S2