Basic Procedure; Replacing The Processor Heat Sink; Required Tools; Preliminary Steps - Fujitsu PRIMERGY MX130 S2 Upgrade and maintenance manua Upgrade And Maintenance Manual

Processors
11.1

Basic procedure

Supported processors
– AMD FX, AMD Sempron, Athlon II, Phenom II
– Socket type: AM3+
– Thermal Design Power (TDP) class: 95W
11.2

Replacing the processor heat sink

Field Replaceable Units (FRU)
Average task duration: 15 minutes

11.2.1 Required tools

Preliminary and concluding steps: tool-less
●
Removing and installing the processor heat sink:
●
– Phillips PH2 / (+) No. 2 screw driver

11.2.2 Preliminary steps

Before replacing the processor heat sink, perform the following steps:
Ê Follow all procedures described in section
188 Upgrade and Maintenance Manual
"Opening the server" on page 48.
MX130 S2