Installing The Connector Cover; Concluding Steps - Fujitsu PRIMERGY CX250 S2 Upgrade And Maintenance Manual

6.4.2.4

Installing the connector cover

V
CAUTION!
Always replace connector covers into the unused PCI slot openings to
comply with applicable EMC regulations and satisfy cooling
requirements.
Figure 55: Installing the connector cover
Ê Hook the slot cover in the mezzanine card bracket on one side.
Ê Close the card bracket until it snaps in place.
6.4.2.5

Concluding steps

Perform the following procedures:
"Installing the mezzanine card bracket" on page 49
Ê
"Installing the server node in the server enclosure" on page 63
Ê
"Switching on the server node" on page 64
Ê
CX250 S2
Expansion cards and battery backup units
Upgrade and Maintenance Manual 121