11.2.2.2 Control Elements; 11.2.2.3 Indicators On The Control Panel - Fujitsu PRIMERGY CX250 S2 Upgrade And Maintenance Manual

11.2.2.2 Control elements

On/Off button
When the system is switched off, it can be switched on again by
pressing the On/Off button.
When the system is operating, pressing the On/Off button will
switch off the system.
V
I
ID ID button
ID LED lights up (blue) when the ID button is pressed. Both ID
indicators are synchronized.

11.2.2.3 Indicators on the control panel

Power-on indicator (green)
Lights up green when the server node is switched ON.
Flashes green if the server node has been switched on and is in an
error state.
ID ID indicator (blue)
Lights up blue when the system has been selected by pressing on
the ID button in the chassis frontpanel.
The ID indicator can also be activated via the BMC Web interface
and its status reported to the BMC.
CX250 S2
CAUTION!
Risk of loss of data!
The On/Off button does not disconnect the server node from
the mains voltage. To disconnect from the mains completely,
remove the power plug(s).
Upgrade and Maintenance Manual
Appendix
261