Preparing The Mezzanine Card - Fujitsu PRIMERGY CX250 S2 Upgrade And Maintenance Manual

6.4.1.3

Preparing the mezzanine card

Figure 49: 10 Gbit Ethernet Controller dual port SFP+
Ê Remove the expansion card from its protective packaging.
I
For further instructions regarding controller settings, please refer to
the accompanying documentation.
Figure 50: Removing connector cover
Ê Remove the connector cover as shown.
Ê Mount the mezzanine card bracket onto the card as described in
the mezzanine card bracket onto the card" on page
V
CAUTION!
Keep the slot bracket for further use.
CX250 S2
Expansion cards and battery backup units
Upgrade and Maintenance Manual
"Mounting
51.
115