Processors
11.3
Replacing the processor heat sink
Field Replaceable Unit
(FRU)
Tools: Phillips PH2 / (+) No. 2 screw driver
11.3.1 Preliminary steps
"Locating the defective server" on page 44
Ê
"Shutting down the server" on page 52
Ê
"Opening the server" on page 55
Ê
"Removing the system fan module" on page 153
Ê
11.3.2 Replacing the processor heat sink
Ê Remove the processor heat sink as described in section
processor heat sink" on page
Ê Apply thermal paste to the processor surface as described in section
"Applying thermal paste" on page
Ê Install the processor heat sink as described in section
processor heat sink" on page
11.3.3 Concluding steps
"Installing the system fan module" on page 156
Ê
"Closing the server" on page 64
Ê
"Connecting the server to the mains" on page 67
Ê
"Switching on the server" on page 71
Ê
234
225.
229.
231.
Upgrade and Maintenance Manual
Hardware: 15 minutes
"Removing the
"Installing the
TX1320 M1