5.2
Completing the maintenance task
5.2.1
Updating or recovering the system board BIOS and
BMC
After replacing the system board, it is essential to upgrade the BIOS and BMC
to the latest version. The latest BIOS and BMC versions are available from the
Fujitsu support internet pages at:
http://ts.fujitsu.com/support/
http://jp.fujitsu.com/platform/server/primergy/downloads/
I
Fujitsu does not assume responsibility for any damage done to the
server or for the loss of any data resulting from BIOS updates.
5.2.1.1
Updating or recovering the system board BIOS
Flash BIOS Update with a USB stick
Ê Make sure, that you have a bootable USB stick.
I
If your USB stick is not bootable proceed as follows:
Ê The USB stick is inserted in the USB port of the system that
downloads the USB image file.
Ê Follow the instructions.
You need a USB stick on which the BIOS update files will be stored.
The data on the USB stick will be fully erased and overwritten.
Make sure, that all data are saved before.
Ê Unzip the downloaded zip file from CX250 S2 / D3196 Flash BIOS for
USB Image.
Ê Copy all extracted files to the bootable USB stick.
Ê Boot the system from the inserted bootable USB stick.
Ê Wait until the screen output appears.
Ê Press the function key [F11] and select the bootable USB stick with the
arrow keys Ê and Ë.
CX250 S2
(EMEA market)
Upgrade and Maintenance Manual
Basic software procedures
(Japanese market)
67