Traffic Control; Mac Filter Configuration - NETGEAR GS748T Software Administration Manual

Traffic Control

From the Traffic Control link, you can configure MAC Filters, Storm Control, Port Security,
and Protected Port settings. To display the page, click the Security
The Traffic Control folder contains links to the following features:
• MAC Filter:
• MAC Filter Configuration
• MAC Filter Summary
• Storm Control
• Port Security:
• Port Security Configuration
• Port Security Interface Configuration
• Security MAC Address
• Protected Ports Membership

MAC Filter Configuration

Use the MAC Filter Configuration page to create MAC filters that limit the traffic allowed into
and out of specified ports on the system.
To display the MAC Filter Configuration page, click Security
the MAC Filter MAC Filter Configuration link.

In the following figure, the source and destination port member areas have been expanded to
show the ports. Click the orange bar to show the ports or LAGs.
GS748T Smart Switch
on page 195
on page 197
on page 198
on page 199
on page 202
on page 203
on page 200
Traffic Control, and then click

195
Traffic Control tab.
