NETGEAR GS748T Software Administration Manual page 128

To configure a static MAC address:
1. To add a static MAC address entry
a. From the Interface menu, select the port or LAG on which to configure the static MAC
address.
b. Specify the MAC address to add.
c. Select the VLAN ID corresponding to the MAC address to add.
d. Click Add.
2. To delete a static MAC address, select the check box next to the entry and click Delete.
3. To modify the settings for a static MAC address, select the check box next to the entry,
update the desired values, and click Apply.
4. Click Refresh to reload the page and display the latest MAC address learned on a specific
port.
5. Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
GS748T Smart Switch
128