NETGEAR GS748T Software Administration Manual page 55

Field
Energy Detect Admin Mode
Energy Detect Operational
Status
Short Reach Admin Mode
Short Reach Operational
Status
EEE Admin Mode
Click Refresh to update the page with the most current data from the switch
Green Ethernet LPI History
Use this page to set the sampling interval for EEE LPI data and to specify the number of
samples to keep. From this page, you can also view per-port EEE LPI data.
To access this page, click System
History.
You do not need to select a port to configure the LPI sampling interval and maximum number
of samples to keep. These settings are global, and the values you specify are applied to all
ports. To configure the LPI settings for the switch:
GS748T Smart Switch
Description
Shows whether Energy Detect Mode is administratively enabled on the port.
Shows the current operational status of the Green Mode for the selected
port.
Shows the administrative status of Short Reach Mode on the port. With short
reach mode enabled, PHY goes into low power mode when cable length is
less than a given limit.
Indicates whether the port is in low-power mode due to the cable length.
Shows the administrative status of Energy Efficient Ethernet Mode on the
port. With EEE mode enabled, the port transitions to low power mode during
link idle condition.
Management

55
Green Ethernet Green Ethernet LPI
 