System Information - NETGEAR GS748T Software Administration Manual

System Information

After a successful login, the System Information page displays. Use this page to configure
and view general device information.
To display the System Information page, click System
A screen similar to the following displays.
To define system information:
1. Open the System Information page.
2. Define the following fields:
• System Name. Enter the name you want to use to identify this switch. You may use
up to 31 alphanumeric characters. The factory default is blank.
• System Location. Enter the location of this switch. You may use up to 31
alphanumeric characters. The factory default is blank.
• System Contact. Enter the contact person for this switch. You may use up to 31
alphanumeric characters. The factory default is blank.
3. Click Apply.
The system parameters are applied, and the device is updated.
GS748T Smart Switch
Management

32

System Information.

