Voice Vlan Port Setting - NETGEAR GS748T Software Administration Manual

Voice VLAN Port Setting

To display the Voice VLAN Port Setting page, click Switching
Port Setting.
To configure Voice VLAN port settings:
1. Select the check box next to the port to configure. You can select multiple check boxes
to apply the same setting to all selected ports.
2. From the Voice VLAN Mode menu, specify whether to enable or disable Voice VLAN on the
selected port.
3. Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
4. If you make any changes to this page, click Apply to send the updated configuration to the
switch.
Note: The Membership field displays whether the current operational
status of the voice VLAN on the interface is active or not active.
GS748T Smart Switch
92
Voice VLAN Advanced
  