NETGEAR GS748T Software Administration Manual page 159

• IP Precedence. Matches the packet's IP Precedence value to the class criteria's
when Enter a value in the range of 0–7.
• IP ToS. Matches the packet's Type of Service bits in the IP header to the class
criteria's when selected and a value is entered. In the ToS Bits field, enter a two-digit
hexadecimal number to match the bits in a packet's ToS field. In the ToS Mask field,
specify the bit positions that are used for comparison against the IP ToS field in a
packet.
3. Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
4. If you change any of the settings on the page, click Apply to send the updated configuration
to the switch. Configuration changes occur immediately.
5. Click Refresh to refresh the page with the most current data from the switch.
GS748T Smart Switch
159