NETGEAR GS748T Software Administration Manual page 70

The following table describes the detailed local information that displays for the selected port.
Field
Managed Address
Address SubType
Address
Interface SubType
Interface Number
MAC/PHY Details
Auto-Negotiation Supported Specifies whether the interface supports port-speed auto-negotiation. The
Auto-Negotiation Enabled
Auto Negotiation Advertised
Capabilities
Operational MAU Type
MED Details
Capabilities Supported
Current Capabilities
Device Class
Network Policies
Application Type
VLAN ID
VLAN Type
User Priority
DSCP
GS748T Smart Switch
Description
Displays the type of address the management interface uses, such as an IPv4
address.
Displays the address used to manage the device.
Displays the port subtype.
Displays the number that identifies the port.
possible values are True or False.
Displays the port speed auto-negotiation support status. The possible values
are True (enabled) or False (disabled).
Displays the port speed auto-negotiation capabilities such as 1000BASE-T
half-duplex mode or 100BASE-TX full-duplex mode.
Displays the Medium Attachment Unit (MAU) type. The MAU performs
physical layer functions, including digital data conversion from the Ethernet
interface collision detection and bit injection into the network.
Displays the MED capabilities enabled on the port.
Displays the TLVs advertised by the port.
Network Connectivity indicates the device is a network connectivity device.
Specifies the media application type associated with the policy.
Specifies the VLAN ID associated with the policy.
Specifies whether the VLAN associated with the policy is tagged or untagged.
Specifies the priority associated with the policy.
Specifies the DSCP associated with a particular policy type.
70