C - Error Messages - Agilent Technologies 66111A User Manual

C – Error Messages
–131 Invalid suffix [unrecognized units, or units not appropriate]
–138 Suffix not allowed
–141 Invalid character data [bad character, or unrecognized]
–144 Character data too long
–148 Character data not allowed
–150 String data error
–151 Invalid string data [e.g., END received before close quote]
–158 String data not allowed
–160 Block data error
–161 Invalid block data [e.g., END received before length satisfied]
–168 Block data not allowed
–170 Expression error
–171 Invalid expression
–178 Expression data not allowed
Execution Errors
–200 Execution error [generic]
–222 Data out of range [e.g., too large for this device]
–223 Too much data [out of memory; block, string, or expression too long]
–224 Illegal parameter value [device-specific]
–225 Out of memory
–270 Macro error
–272 Macro execution error
–273 Illegal macro label
–276 Macro recursion error
–277 Macro redefinition not allowed
System Errors
–310 System error [generic]
–350 Too many errors [errors beyond 9 lost due to queue overflow]
Query Errors
–400 Query error [generic]
–410 Query INTERRUPTED [query followed by DAB or GET before response complete]
–420 Query UNTERMINATED [addressed to talk, incomplete programming message received]
–430 Query DEADLOCKED [too many queries in command string]
–440 Query UNTERMINATED [after indefinite response]
162
Table C-1. Error Numbers (continued
–2 –2
00 through 99 (sets Standard Event Status Register bit #4)
–3 –3
00 through 99 (sets Standard Event Status Register bit #3)
–4 –4
00 through 99 (sets Standard Event Status Register bit #2)