The Rear Panel - At A Glance; Instrument Configuration - Agilent Technologies 66111A User Manual

1 - Quick Reference

The Rear Panel - At a Glance

1 2
DVM inputs.
Connector plug is interface connector.
removable.
1
WARNING:
WARNING:
5
Output 2 connector
(Agilent 66309B/D only).
Connector plug is removable.

Instrument Configuration

Use the front panel Address key to configure the interface
Refer to "Front Panel Menus - At a Glance"
♦
Select either the GPIB or RS-232 interface.
♦
Enter the GPIB bus address.
♦
Configure the RS-232 baud rate, parity, and flow control.
♦
Select either the SCPI or COMPatibility programming language.
♦
Enable the optional Agilent 14575A remote front panel.
16
3
GPIB (IEEE-488)
display connector.
RS-232 interface for
Agilent 66111A,
66311B/D only.
2
NO OPERATOR SERVICEABLE PARTS
DVM
OUTPUT 2
0 - 12V / 0 - 1.5A
-S - +
FOR CONTINUED FIRE PROTECTION, USE SPECIFIED
5 6
6
Output 1 connector.
Connector plug is removable.
IMPORTANT: Install this connector with
its supplied sense jumpers before applying
power to the unit.
Remote front panel
3
REFER SERVICING TO SERVICE TRAINED
- +
!
OUTPUT 1
0 - 15V / 0 - 3A
-S - + +S
+S
LINE
4
INH/FLT (remote
INHibit / internal FauLT)
connector. Connector plug
is removable.
4
INH FLT
+ - +
7
7
Power cord
connector (IEC 320)