Trigger:sequence2:Source Trigger:acquire:source; Trigger:sequence1:Define Trigger:sequence2:Define - Agilent Technologies 66111A User Manual

8 – Language Dictionary
TRIGger:SEQuence2:SOURce
TRIGger:ACQuire:SOURce
These commands select the trigger source for measurement triggers as follows:
BUS GPIB device, *TRG, or <GET> (Group Execute Trigger)
trigger is generated internally when the measured waveform crosses the trigger level
INTernal
with the selected slope.
Command Syntax TRIGger:SEQuence2:SOURce<source>
Parameters BUS | INTernal
*RST Value INTernal
Examples TRIG:ACQ:SOUR BUS
Query Syntax TRIGger:SEQuence2:SOURce?
Returned Parameters <CRD>
TRIGger:SEQuence1:DEFine
TRIGger:SEQuence2:DEFine
These commands define the names that are aliased to trigger sequences 1 and 2. The command accepts
only ACQuire for sequence 2 and TRANsient for sequence 1 as predefined names. The query allows the
user to query the instrument names aliased to sequences 1 and 2.
Command Syntax TRIGger:SEQuence1:DEFine TRANsient
Parameters TRANsient, ACQuire
Examples SEQ1:DEF ACQ
Query Syntax TRIGger:SEQuence1:DEFine?
Returned Parameters <CRD>
Related Commands TRIG:SEQ2:ACQ
134
TRIGger:ACQuire:SOURce<source>
TRIGger:ACQuire:SOURce?
TRIGger:SEQuence2:DEFine ACQuire
TRIGger:SEQuence2:DEFine?
TRIG:SEQ1:TRAN
SEQ2:DEF TRAN