Safety Considerations; Options And Accessories - Agilent Technologies 66111A User Manual

2 - General Information

Safety Considerations

This dc source is a Safety Class 1 instrument, which means it has a protective earth terminal. That
terminal must be connected to earth ground through a power source equipped with a ground receptacle.
Refer to the Safety Summary page at the beginning of this guide for general safety information. Before
installation or operation, check the dc source and review this guide for safety warnings and instructions.
Safety warnings for specific procedures are located at appropriate places in the guide.

Options and Accessories

Option
100
87−106 Vac, 47−63 Hz
220
191−233 Vac, 47−63 Hz
230
207−253 Vac, 47−63 Hz
8ZJ Delete instrument feet option
004 Output compensation is factory set to High mode for best transient response.
(Refer to chapter 3, under "Output Compensation" for more information)
1
AXS Rack mount kit for two side-by-side units of equal depth. Consists of:
Lock-link kit (p/n 5061-9694) and Flange kit (p/n 5062-3974)
1
1CM Rack mount kit for one unit (p/n 5062-3972)
521 Solid state relays to connect and disconnect the output (Models 66309B/D only)
052 Device characterization software for current measurements and display
(available for Agilent Model 66311B only)
1
Support rails are required when rack mounting units. Use E3663A support rails for Agilent rack cabinets. If you are
using non-Agilent rack cabinets, contact the rack manufacturer to obtain support rails for your cabinet.
GPIB cables 1.0 meter (3.3 ft)
2.0 meters (6.6 ft)
4.0 meters (13.2 ft)
0.5 meters (1.6 ft)
Rack mount with slide - for two side-by-side units of different depths
Rack mount - for two side by side units of different depths
Rack mount with slide - for one unit
Remote Front Panel - for viewing up to six units that are installed in a
remote location where the front panels is not visible.
Includes an ac/dc adapter for powering up to 3
remote panels
22
Table 2-1. Options
Description
Table 2-2. Accessories
Item Part Number
Agilent 10833A
Agilent 10833B
Agilent 10833C
Agilent 10833D
5062-3996; 1494-0015
5062-3996
5062-3996; 1494-0015;
5062-4022
Agilent 14575A