Table 5-2: Voip - Signaling Protocol - Sip Proxy And Registrar - AudioCodes MP-202 User Manual

Table 5-2: VoIP - Signaling Protocol - SIP Proxy and Registrar

Parameter
SIP Transport Protocol*
Local SIP Port*
Gateway Name-User
Domain*
Use SIP Proxy
Proxy IP Address or
Host Name
Proxy Port
Use SIP Proxy IP and
Port for Registration
Use SIP Outbound
Proxy
*
This parameter appears only in 'Advanced' mode.
MP-202 Telephone Adapter
Choose either UDP (default) or TCP.
The UDP/TCP port (default = 5060) on which the Stack listens.
This domain name will be sent in the From header of outgoing Invite
messages.
When checked, outgoing calls will be routed to the configured SIP proxy. If
the parameter 'Use SIP Proxy IP and Port for Registration' is checked as
well, the configured SIP proxy will also be used as the registrar, allowing
incoming calls.
The IP address or host name of the SIP proxy.
The UDP or TCP port of the SIP proxy.
Use the SIP proxy IP and port for registration. Default = checked. When
checked, there is no need to configure the address of the registrar
separately.
Use an outbound SIP proxy (all SIP messages will be sent to this server as
the first hop). Default = unchecked.
38
Description
MP-202
LTRT-50604