Table 5-15: 'Speed Dial Settings' - Direct Call; Figure 5-15: Voip - Speed Dial Settings - Local Line; Figure 5-16: Voip - Speed Dial - Direct Call - AudioCodes MP-202 User Manual

MP-202 Telephone Adapter
Click 'OK'; you're returned to the Voice Over IP' screen displaying the configured
speed dial (refer to the figure below, displaying how two local lines are configured for
speed dial).
The figure below shows how a speed dial direct call is configured. The call is configured to
one of the pre-configured lines of a remote device (10.16.2.26).
Parameter
Speed Dial
Destination
User ID
IP Address or Host
Name
Port
User's Manual

Figure 5-15: VoIP - Speed Dial Settings - Local Line

Figure 5-16: VoIP - Speed Dial - Direct Call

Table 5-15: 'Speed Dial Settings' - Direct Call

A shortcut number which you will dial to call this party.
The entry's destination, in this case a direct call.
Specify the remote party's user ID.
Specify the remote party's IP Address or host name.
The SIP UDP or TCP port of the remote party.
5. Configuring VoIP Parameters
Description
53 February 2007