AudioCodes MP-202 User Manual page 90

4. Select the 'Point-to-Point Tunneling Protocol Virtual Private Network (PPTP VPN)'
radio button and click Next. The 'Point-to-Point Tunneling Protocol Virtual Private
Network (PPTP VPN)' screen will appear (see figure 8.205).
Figure 9-17: Point-to-Point Tunneling Protocol Virtual Private Network (PPTP VPN)
5. Enter the username and password provided by the administrator of the network you
are trying to access.
6. Enter the remote tunnel endpoint address. This would be the IP address or domain
name of the remote network computer, which serves as the tunnel's endpoint.
7. Click 'Next'; the screen 'Connection Summary' opens (refer to the figure).
8. Check the check box 'Edit the Newly Created Connection' if you wish to be routed to
the new connection's configuration screen after clicking Finish.
MP-202 Telephone Adapter
Figure 9-18: Connection Summary
90
MP-202
LTRT-50604