AudioCodes MP-202 User Manual page 118

Testing the 3-VLAN Setup
To test the 3-VLAN setup:
1. Place a VOIP call. Verify that the VOIP is using 802.1q/p, that the VLAN ID is 300 and
that the IP is 3.3.x.x (refer to the screen shown below).
2. Connect a PC to the LAN port of MP202 (1 or 2) and send traffic (ICMP). Verify that
the ICMP traffic is tagged (802.1q) and that it is using VLAN 521.
MP-202 Telephone Adapter
Figure 10-24: Testing the Setup
Figure 10-25: Testing the Setup
118
MP-202
LTRT-50604