Performing A Traceroute; Mac Cloning - AudioCodes MP-202 User Manual

5. In a few seconds, diagnostic statistics are displayed (refer to the figure below). If no
new information is displayed, press the 'Refresh' button.

13.6.2 Performing a Traceroute

To perform a traceroute:
1. Click the 'Diagnostics' icon from the 'Advanced' screen in the Web-based
Management; the 'Diagnostics' screen is displayed.
2. Under the screen section 'Traceroute', enter the IP address or URL to be tested in the
'Destination' field.
3. Press the button 'Go'; a traceroute commences, constantly refreshing the screen (refer
to the figure above).
4. To stop the trace and view the results, press 'Cancel'.
13.7

MAC Cloning

A Media Access Control (MAC) address is the numeric code that identifies a device on a
network, such as your external cable/DSL modem or a PC network card. Your Service
Provider may ask you to supply the MAC address of your PC, external modem, or both.
When replacing an external modem with your gateway, you can simplify the installation
process by copying the MAC address of your existing PC to the gateway.
MP-202 Telephone Adapter
Figure 13-8: Advanced - Diagnostics - Statistics
178
MP-202
LTRT-50604