Regional Settings - AudioCodes MP-202 User Manual

MP-202 Telephone Adapter
In such a case, you do not need to delay the setup process by informing your Service
Provider of newly installed equipment.
To use MAC cloning:
1. Click the 'MAC Cloning' icon in the 'Advanced' screen of the Web-based Management;
the MAC Cloning screen appears (refer to the figure).
2. Enter the physical MAC address to be cloned.
3. Press the button 'Clone My MAC Address'.
13.8

Regional Settings

The behavior and parameters of analog telephones lines vary between countries. The set
of Call Progress Tones, the protocol used for caller ID and the analog line impedance are
all location-specific. The MP-202 enables users to select the country they reside in and the
MP-202 automatically selects the correct regional settings.
To select your present location:
1. Click the icon 'Regional Settings' in the 'Advanced' screen of the Web-based
Management; the 'Regional Settings' screen opens (refer to the figure below).
2. Select the country from the drop-down menu. If your current location is not in the list,
contact your Service Provider.
User's Manual
Figure 13-9: Advanced - MAC Cloning Settings
Figure 13-10: Regional Settings
179
13. Advanced Settings
February 2007