Upgrading From The Internet - AudioCodes MP-202 User Manual

2. In the screen section 'Upgrade From a Computer in the Network', click the button
'Upgrade Now'; the screen 'Upgrade From a Computer in the Network' opens (refer to
the figure).
Figure 13-15: Upgrade From a Computer in the Network
3. Enter the path of the software image file or click 'Browse' and navigate to the rmt file
on your PC. Click 'OK'; the file starts loading from your PC to your gateway. When
loading is complete, a confirmation screen prompts you if you want to upgrade to the
new version.
4. Click 'OK' to confirm; the upgrade process commences and shouldn't take longer than
a couple of minutes to complete.
5. At the conclusion of the upgrade process, the device automatically reboots. The new
software version runs, maintaining your custom configurations and settings.
Note:
Do not power down the MP-202 or stop the upgrade process in the middle or
else the MP-202 will become inoperable.

13.12.2 Upgrading From the Internet

The Remote Update mechanism helps you keep your software image up-to-date, by
performing routine daily checks for newer software versions, as well as letting you perform
manual checks.
MP-202 Telephone Adapter 186
MP-202
LTRT-50604