Viewing, Changing Tr-069 Parameters Using The Cli - AudioCodes MP-202 User Manual

•
Password
•
ExternalIPAddress
•
DNSServers
•
TransportType
•
PPPoEACName
•
PPPoEServiceName
The MP-202 supports the following Remote Procedure Calls (RPCs):
GetRPCMethods
SetParameterValues
GetParameterValues
GetParameterNames
SetParameterAttributes
GetParameterAttributes
AddObject
DeleteObject
Download
Reboot
Note that the implementation of SetParameterAttributes is empty; MP-202 does not
implement access control nor notifications as defined in the specification.

11.2.1 Viewing, Changing TR-069 Parameters Using the CLI

TR-069 parameters can be viewed and configured via the CLI. This section presents a
specific example of how to view and change TR-069 parameters. Use the example as a
guide.
To run CLI commands:
4. Open Telnet
5. Access the system from a PC connected to the LAN port of the MP-202 Telnet
192.168.2.1
6. Enter the administrator user and password.
To view the current TR-069 settings, run these commands:
rg_conf_print manufacturer/vendor_name
rg_conf_print manufacturer/vendor_oui
rg_conf_print manufacturer/product_class
rg_conf_print manufacturer/model_number
rg_conf_print manufacturer/hardware/serial_num
rg_conf_print cwmp/acs_url
rg_conf_print cwmp/username
rg_conf_print_obscure cwmp/password
rg_conf_print cwmp/conn_req_username
rg_conf_print_obscure cwmp/conn_req_password
MP-202 Telephone Adapter 138
MP-202
LTRT-50604