AudioCodes MP-202 User Manual page 172

Note:
To allow remote access to MP-202 services:
1. Click the 'Remote Administration' button. The 'Remote Access Configuration' screen
will appear (refer to the figure above).
2. Select the services that you would like to make available to computers on the Internet.
MP-202 Telephone Adapter
Figure 13-2: Remote Administration
Telnet and Web-Management can be used to modify the settings of the
firewall or to disable it. Users can also change local IP addresses and other
settings, making it difficult or impossible to access the Telephone Adapter
from the home network. Therefore, remote access to Telnet or HTTP services
should be blocked and should only be permitted when absolutely necessary.
172
MP-202
LTRT-50604