System Settings - AudioCodes MP-202 User Manual

13.9

System Settings

The screen 'System Settings' allows you to configure various system and management
parameters.
Use the screen section 'System Settings' to configure:
The Telephone Adapter's host name. The host name is the Telephone Adapter's URL
address.
Your network's local domain.
Use the screen section 'MP-202 Management Console' to configure:
Automatic Refresh of System Monitoring Web Pages - select this check-box to enable
the automatic refresh of system monitoring web pages.
Warn User Before Network Conguration Changes - select this check-box to activate
user warnings before network configuration changes take effect.
Session Lifetime - the duration of idle time (in seconds) in which the WBM session will
remain active. When this duration times out, the user will have to re-login.
Language - select a different language for the WBM interface.
Use the link 'Remote Administration' to access the MP-202's remote administration screen,
from where you can selectively enable services that grant remote access to the MP-202.
Use the screen section 'Management Application Ports' to configure:
Primary/secondary HTTP ports
Primary/secondary HTTPS ports
Primary/secondary Telnet ports
Secure Telnet over SSL ports
Use the screen section 'System Logging' to configure:
System Log buffer size
Remote system notify level
•
None
•
Error
•
Warning
•
Information
Use the screen section 'Security Logging' to configure:
Security Log buffer size
Remote system notify level
•
None
•
Error
•
Warning
•
Information
Use the screen section 'Outgoing Mail Server':
MP-202 Telephone Adapter 180
MP-202
LTRT-50604