AudioCodes MP-202 User Manual page 199

MP-202 Telephone Adapter
Note:
To edit the DHCP server settings for a device:
1. Under the column 'Action', click the icon 'Edit'; the DHCP Server settings for this
device are displayed (refer to the figure).
Figure 13-27: Advanced - IP Address Distribution - DHCP Server
2. From the 'IP Address Distribution' drop-down list, select whether to enable or disable
the DHCP server.
3. From the 'IP Address Distribution' drop-down list, select whether the gateway will
function as a DHCP server or as DHCP relay. Choose 'DHCP Server'; the screen
section 'DHCP Server' is displayed, showing the parameters described in the table
below.
User's Manual
If In the column 'Service' of the 'IP Address Distribution' screen, if a gateway
is indicated 'Disabled', then DHCP services are not being provided to hosts
connected to the network through that gateway. This means that the gateway
will not assign IP addresses to these computers, which is useful if you wish to
work with static IP addresses only.
199
13. Advanced Settings
February 2007