Performing A Traceroute; Figure 13-12: Advanced - Diagnostics - Statistics - AudioCodes MP-202 User Manual

MP-202 Telephone Adapter
2. Under the screen section 'Ping (ICMP Echo)', enter the IP address or URL to be
tested in the 'Destination' field.
3. Enter the number of pings you would like to perform.
4. Press the 'Go' button.
5. In a few seconds, diagnostic statistics are displayed (refer to the figure below). If no
new information is displayed, press the 'Refresh' button.

13.6.2 Performing a Traceroute

To perform a traceroute:
1. Click the 'Diagnostics' icon from the 'Advanced' screen in the Web-based
Management; the 'Diagnostics' screen is displayed.
2. Under the screen section 'Traceroute', enter the IP address or URL to be tested in the
'Destination' field.
3. Press the button 'Go'; a traceroute commences, constantly refreshing the screen (refer
to the figure above).
4. To stop the trace and view the results, press 'Cancel'.
Version 2.6

Figure 13-12: Advanced - Diagnostics - Statistics

173
13. Advanced Settings
May 1