Resetting The Settings - Barco PHWU-81B User And Installation Manual

MANUAL – SETTING
COLOR
GAIN
SATURATION
HUE
WHITE R
WHITE G
WHITE B
AUTO PATTERN
Image 6-20
7. Select an item you want to set by pressing the ▲ or ▼ key.
Select the color you want to adjust using COLOR.
When you set AUTO PATTERN to ON, the test pattern of each color is displayed.
8. Select a setting value by pressing the ◄ or ► key.
9. Repeat step 7 and step 8, if necessary.
Adjustment using a chroma meter
1. Display the MULTI-SCREEN menu.
2. Select COLOR MATCHING by pressing the ▲ or ▼ key.
COLOR MATCHING
Image 6-21
3. Select MEASURE by pressing the ◄ or ► key.
Set now the measured brightness and the chromaticity coordinates
4. Select MEASURE by pressing the ▲ or ▼ key.
MEASURE
Image 6-22
5. Select MEASURED DATA
6. Press the ENTER key.
MEASURE – TARGET DATA
COLOR
GAIN
x
y
AUTO PATTERN
Image 6-23
7. Select an item you want to set by pressing the ▲ or ▼ key.
→ Select the color you want to adjust using COLOR.
→ When you set AUTO PATTERN to ON, the test pattern of each color is displayed.
8. Select a setting value by pressing the ◄ or ► key.
9. Repeat step 7 and step 8, if necessary.

6.18 Resetting the settings

About reset
You can reset the SETTING, MANUAL, and MEASURE settings to the factory defaults.
How to reset
1. Display the MULTI-SCREEN menu.
2. Select SETTING, MANUAL or MEASURE by pressing the ▲ or ▼ key.
3. Select RESET by pressing the ◄ or ► key.
4. Press the ENTER key.
R5905597 PHXX SERIES 20/05/2014
RED
100
0
0
- - -
- - -
- - -
ON
OFF
MEASURED DATA
by pressing the ◄ or ► key.
RED
.
* ***
.
* ***
.
* ***
ON
6. Adjustments with the ADVANCED menu
67