Connections; Removing The Rear Cover; Removing The Covers - Barco PHWU-81B User And Installation Manual

3. CONNECTIONS

Preparations
To get access to the connections, the covers of the projector must be removed.
C
AUTION
3.1

Removing the covers

W
ARNING
Removing the side cover
1. Loosen two screws (a) on the rear and two screws (b) on the side that are securing the side cover (c) using a Phillips screwdriver.
(c)
(b)
Image 3-1
Side cover removal
2. Slide and remove the side cover towards the rear.

Removing the rear cover

1. Loosen the four screws (d) that are securing the rear cover (e) using a Phillips screwdriver.
R5905597 PHXX SERIES 20/05/2014
:
Only authorized service personnel are allowed to remove the covers.
:
Make sure that the power of the projector is turned off.
(c)
(b)
(a)
(a)
3. Connections
21