2. Preparing the projector
2.9
Correcting skewed or distorted image
Problem
For the best projection, project images on a flat screen installed at 90 degrees to the floor. If necessary, tilt the projector using the
two adjustment feet on the bottom of the projector.
S
Image 2-13
S
Screen
F
Adjustable feet
How to adjust
1. Tilt up the projector to the appropriate angle.
2. Rotate the adjustment feet for fine adjustment.
Do not transport the projector with its adjustment feet extended. Otherwise the adjustment feet may be dam-
aged.
2.10 About fine streaks on the screen
About fine streaks
Fine streaks seen on the projected image are due to interference with the screen surface and is not a malfunction. Replace the
screen or displace the focus a little.
20
F
R5905597 PHXX SERIES 20/05/2014