Projecting Images - Barco PHWU-81B User And Installation Manual

4. Getting started
main menu is on screen, go to button required
result
adjust keystone
select language
show lamp info
show lamp mode
show projector info
enter advanced menu
4.3

Projecting images

Preparation
Remove the lens cap before starting projecting images.
1
Image 4-4
1 Status LED
2 ON/OFF key
3 OK key
4 HOME key
How to project
1. Confirm the STATUS Led lights up red.
If the projector was turned off before the lamp was cooled down sufficiently last time, the fan may start rotating and the ON/OFF
key may not work after the power cord is plugged. After the fan stops rotating, press the ON/ OFF key to turn back on the STATUS
Led.
2. Turn on the power of the connected equipment.
3. Press the ON/OFF key.
32
RCU Lite → OSD Lite
Action → on screen
>
NORMAL
> = NORMAL
contact your service technician to enter the advanced menu
default password : ◄ ◄ ► ▼
>
2
and/or
and/or
go to lamp mode desired (default setting =
and/or go to lamp mode desired (default setting
, , ,
3
4
R5905597 PHXX SERIES 20/05/2014
>
>
>
>
>
>