Table of Contents
Advertisement
6. Adjustments with the ADVANCED menu
COLOR MATRIX
COLOR MATRIX
−USER
−USER
BASE
BASE
RED
RED
YELLOW
YELLOW
GREEN
GREEN
CYAN
CYAN
BLUE
BLUE
MAGENTA
MAGENTA
SATURATION
SATURATION
RGB-TINT
RGB-TINT
Image 6-7
4. Press the ENTER key.
5. Select an item you want to set using the ▲ or ▼ key.
-
To set COLOR MATRIX that is used as the base, select BASE.
-
If you want to adjust the saturation of all colors of the image, select SATURATION.
-
If you want to adjust the balance of all colors of the image, select RGB‑TINT.
6. Press the ◄ or ► key to adjust the color balance of the selected color.
7. Repeat step 5 and step 6 for optimum adjustment results.
Note
→ When the input signal is VIDEO or COMPUTER, the items in the COLOR MATRIX-USER menu are automatically set to the
predetermined values. You can change these values manually.
→ To disable the COLOR MATRIX adjustment, select FLAT in step 3.
→ When you make COLOR MATRIX adjustment, the colors of the menu will change, but this is not a failure.
6.8
Setting the screen size
About screen size
Change the setting of the SCREEN according to the type of the screen to be used.
How to change
1. Display the INSTALLATION 2 menu.
2. Select SCREEN by pressing the ▲ or ▼ key.
MULTI-
IMAGE INSTALL1
INSTALL2
SCREEN FEATURE SIGNAL NETWORK
AUTO POWER ON
AUTO POWER OFF
SCREEN
Image 6-8
3. Select your desired aspect ratio by pressing the ◄ or ► key.
You can select the aspect ratio from 16:10 (for PHWU-81B/PHWX- 81B only), 16:9, and 4:3.
4. To cancel the menu, press the MENU key.
6.9
Setting the aspect ratio
About aspect ratio
You can change the aspect ratio of the input video signal (or the ratio of width to height of the image). Change the setting according
to the type of the screen to be used or your preference.
How to set
1. Display the SIGNAL menu.
2. Select ASPECT by pressing the ▲ or ▼ key.
58
COMPUTER
COMPUTER
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
INFO
OFF
5min
16:10
R5905597 PHXX SERIES 20/05/2014
Advertisement
Table of Contents
