Table of Contents
Advertisement
9. Advanced features
Command
LAMP?
INST?
NAME?
INF1?
INF2?
INF0?
CLSS?
This projector is fully compliant to the specifications of JBMIA PJLink™ Class 1. It supports all the commands defined by PJLink™
Class 1, and the compliance has been verified with the PJLink™ standard specifications Version 1.0.
9.5
Monitoring and control using SERIAL terminal
Overview
Using the SERIAL terminal, you can monitor and control multiple projectors collectively or individually.
For details, contact your dealer.
Image 9-7
A
RS-232C cable (option)
B
To RS-232C terminal
C
To SERIAL IN
D
To SERIAL OUT
See also the instruction manuals of the devices to be connected.
Connection
Make sure that the power supplies of the projector and the computer are off.
1.
Connect one end of a commercially available RS-232C cable to the SERIAL IN terminal on the projector to be connected to the
computer.
2.
Connect the other end of the RS-232C cable to the serial port on the computer.
3.
Connect one end of an RS-232C cable to the SERIAL OUT terminal on the projector that is connected to the computer.
4.
Connect the other end of the RS-232C cable to the SERIAL IN terminal on the second projector.
For the connection of the second and later projectors, connect their SERIAL OUT terminals and the SERIAL IN terminals using
RS-232C cables.
90
Description
Inquiry about the lamp state
Inquiry about the available
inputs
Inquiry about the projector
name
Inquiry about the manufacturer
name
Inquiry about the model name
Inquiry about other information No other information is available. No parameter is returned.
Inquiry about the class
information
A
B
C
D
Remark (Parameter)
1st value (1 to 5 digits): Cumulative LAMP 1 operating time (This item
shows a lamp operating time (hour) calculated based on that LAMP
MODE is STANDARD.)
2nd value: 0 = Lamp off, 1 = Lamp on
3rd value (1 to 5 digits): Cumulative LAMP 2 operating time (This item
shows a lamp operating time (hour) calculated based on that LAMP
MODE is STANDARD.)
4th value: 0 = Lamp off, 1 = Lamp on
The following value is returned. "11 12 21 22 31 32 33"
The projector name set on the NETWORK menu is returned.
"BARCO" is returned.
"PHWU-81B", "PHWX-81B", or "PHXG-91B" is returned.
"1" is returned.
A
C
D
A
C
D
R5905597 PHXX SERIES 20/05/2014
Advertisement
Table of Contents
