Advanced Settings - Barco G62 User Manual

• Light green
• Light blue
• Pink
• Gray

8.12 Advanced settings

About settings
Configure advanced color settings to improve the color performance.
Realcolor P7
Change the color of a projected image by adjusting each color component in the image. The adjustable color
includes Red, Green, Blue, Cyan, Yellow, and Magenta (R/G/B/C/Y/M).
Image 8–1
• Auto Test Pattern:
Enable the function to view a specific color pattern while adjusting.
• R/G/B/C/M/Y:
Select a color for further adjustment.
• Hue:
Adjust the hue of the selected color. The value reflect the number of degrees of rotation around the
chromaticity diagram from the original color. Increasing value indicates counterclockwise rotation, and
decreasing value, clockwise rotation.
• Saturation:
Adjust the saturation of the selected color. The value indicates the color shifts from or towards the white in
the center of the chromaticity diagram.
• Gain:
Adjust the gain of the selected color. Increase the value to brighten the image (add white to a color) or
decrease the value to darken the image (add black to a color).
• Reset:
Reset the function settings to factory default values.
HDR
Configure the settings for the High Dynamic Range (HDR) function.
• HDR
- Off:
Turns off the projector's HDR function, and the projector announces that it does not support HDR
content so that the input device only sends out SDR signals.
- Auto:
When receiving HDR signals, the projector automatically changes to HDR display mode.
• HDR picture mode
- Bright:
Increase the color saturation for bright images.
User controls – Image menu
R5914653 /10 G62 51