Table of Contents
Advertisement
6. Adjustments with the ADVANCED menu
14.Select a setting value by pressing the ◄ or ► key.
15.Repeat step 13 and step 14, if necessary.
16.Press the MENU key once.
17.Select BRIGHT UNIFORMITY CORRECTION
SETTING
Image 6-16
→ When EDGE BLENDING is ON, the brightness of the projected images is made even.
18.Press the ENTER key.
The BRIGHT UNIFORMITY CORRECTION dialog box and the correction position marker are displayed.
Image 6-17
1
BRIGHT UNIFORMITY CORRECTION dialog box
2
Correction position marker
Every time you press the ENTER key, the BRIGHT UNIFORMITY CORRECTION dialog box shows POSITION and LEVEL al-
ternately.
POSITION
LEVEL
19.Cancel the BRIGHT UNIFORMITY CORRECTION dialog box.
Press any key other than the ▲, ▼, ◄, or ►, and ENTER keys to clear the dialog box. Or, the dialog box disappears in 10
seconds after the last use.
20.To cancel the menu, press the MENU key.
6.17 Adjusting the color variations
How to adjust
You can adjust the variations in the colors of the images displayed on multiple projectors using the menu settings.
Adjustment while viewing the screen
1. Display the MULTI-SCREEN menu.
2. Select COLOR MATCHING by pressing the ▲ or ▼ key.
COLOR MATCHING
Image 6-18
3. Select MANUAL by pressing the ◄ or ► key.
4. Select MANUAL by pressing the ▲ or ▼ key.
MANUAL
Image 6-19
5. Select SETTING by pressing the ◄ or ► key.
6. Press the ENTER key.
66
BRIGHT UNIFORMITY
CORRECTION
1
POSITION
:
SELECT
:
ENTER
2
Press the ▲, ▼, ◄, or ► key to move the correction position marker.
Press the ◄, or ► key to adjust the correction amount.
OFF
SETTING
by pressing the ◄ or ► key.
R5905597 PHXX SERIES 20/05/2014
Advertisement
Table of Contents
