Connecting The Projector To A Computer - Barco PHWU-81B User And Installation Manual

Take care for the following points
• Plug in the power cord firmly. When unplugging, hold and pull the power plug, not the power cord.
• Do not plug in or out the power cord with your hand wet. It may cause electric shock.
• When you move the projector, turn off the power, unplug the power cord from the wall outlet, and then remove the connected
cords. Otherwise, the power cord may be damaged, resulting in fire or electric shock.
• If dust or metallic substance is on or around the pins of the power plug, unplug the power cord and clean it using a dry cloth.
If you continue to use the projector without cleaning, it may result in fire or electric shock. Clean the power plug periodically at
least once a year.
• Be sure to unplug the power cord from the wall outlet if the projector will not be used for a long period of time. Otherwise, it
may cause fire.
3.3

Connecting the projector to a computer

Preparations
Make sure that the power of the projector and that of the computer are turned off.
When connecting the projector to a desktop computer, disconnect the computer cable that is connected to the monitor.
Analog connection to VIDEO IN-1
1. Connect one end of a commercially available computer cable to the COMPUTER/COMPONENT/VIDEO IN-1 terminal of the
projector.
1
D
Image 3-4
Computer connection to Video1
A Computer
B Connector to computer
C Computer cable (option)
D Connector to Video1
2. Connect the other end of the computer cable to the monitor port of the computer.
Analog connection to VIDEO IN-2
1. Connect one end of a commercially available BNC cable to the COMPUTER/COMPONENT VIDEO IN-2 terminals of the projec-
tor.
1
D
Image 3-5
Computer connection to Video2
A Computer
B Connector to computer
R5905597 PHXX SERIES 20/05/2014
A
2
B
C
R/ P G/Y B/P H/HV V
R B
B
V H/HV B/P
C
A
2
G/Y R/ P
B R
3. Connections
23