Table of Contents
Advertisement
5.8
SIGNAL menu
Overview
IMAGE INSTALL1 INSTALL2 MULTI-
SCREEN FEATURE
MEMORY CALL
SIGNAL MEMORY
RESOLUTION
(MEMORIZE )
HORIZ. POSITION
VERT. POSITION
FINE SYNC.
TRACKING
COMPUTER INPUT
OVER SCAN
HOLD
ASPECT
USER
Image 5-18
Item
MEMORY CALL
SIGNAL MEMORY
RESOLUTION
(MEMORIZE
)
VERTICAL FREQUENCY
HORIZONTAL
FREQUENCY
HORIZ. PIXELS
VERT. LINES
EXECUTE
R5905597 PHXX SERIES 20/05/2014
SIGNAL
NETWORK
INFO
AUTO
MEMORIZE
1024 x 768
0
0
0
0
AUTO
100%
ON
NORMAL
ENTER
Setting
AUTO
1-xxx
- 8-xxx
MEMORIZE
-
-
640-1920
350-1200
OK
IMAGE INSTALL1 INSTALL2 MULTI-
SCREEN FEATURE
RESOLUTION (MEMORIZE)
VERTICAL
FREQUENCY
HORIZONTAL
FREQUENCY
HORIZ. PIXELS
VERT. LINES
EXECUTE
CANCEL
IMAGE INSTALL1 INSTALL2 MULTI-
SCREEN FEATURE
USER
CLAMP POSITION
CLAMP WIDTH
VERT. SYNC.
LPF
SHUTTER(U)
SHUTTER(L)
SHUTTER(LS)
SHUTTER(RS)
Function
Use to select the setting of SIGNAL MEMORY already saved.
Impossible to select if no setting has been saved.
AUTO is selected by default. It optimizes the signal format
automatically depending on the type of video signal supplied from
the computer.
Use to select the SIGNAL MEMORY already saved. The memory
number relevant to the input signal is displayed. Press the ENTER
key to clear the setting already saved.
The settings in the SIGNAL menu can be saved. (See page 48.) Up
to 8 settings can be saved. You can select the memory number. For
example, when you save the signal setting of 720p50 to the memory
1, the memory name is displayed as 1-720p50.
When the settings are already memorized in the selected number,
the settings will be overwritten.
The current resolution is displayed. To change the current setting,
press the ENTER key to display the RESOLUTION (MEMORIZE)
menu. The new setting can be saved to MEMORY.
The vertical frequency of the currently projected video signal is
displayed.
The horizontal frequency of the currently projected video signal is
displayed.
The number of horizontal pixels of the currently projected video signal
is displayed. When you change the current setting, select EXECUTE,
and then press the ENTER key, the image is automatically adjusted
according to the resolution you set. The adjustment result can be
saved to MEMORY
The number of vertical lines of the currently projected video signal is
displayed. When you change the current setting, select EXECUTE,
and then press the ENTER key, the image is automatically adjusted
according to the resolution you set. The adjustment result can be
saved to MEMORY
Press the ENTER key to start the automatic adjustment. At the
completion of the automatic adjustment, a message is displayed and
you can save the adjustment result to MEMORY.
5. Advanced menu
SIGNAL
NETWORK
INFO
60.00 Hz
48.36 KHz
1024
768
OK
OK
SIGNAL
NETWORK
INFO
1
1
AUTO
OFF
0
0
0
0
49
Advertisement
Table of Contents
